13 Best AR-15 Stocks (Complete List)

This isn’t anything fancy, but it’s affordable and works great.

Specs:

Features:

• Mounts on mil-spec sized carbine receiver extension tubes not included from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others, please see the note below
• Sloping cheek weld combines a slim profile with user comfort
• Shielded release latch prevents snagging and accidental operation
• Premium chrome-silicon lock spring provides positive locking and long service life
• Side mounting slots accept optional cheek risers for NON-AR15/M4 applications
• The removable 0.30″ Rubber Butt-Pad offers an anti-slip surface and increases impact protection
• Compatible with Magpul ASAP, ASAP QD, and other receiver-mount sling attachments
• Sling Mounts
• Rear/Bottom – 1.25 in sling loops
• Toe – Lanyard hole for custom para-cord rigs
• NOTE: There are two basic sizes of M4 Carbine receiver extension buffer tube: mil-spec and commercial-spec. If you have a commercial-spec size extension on your rifle, order the Commercial-Spec MOE.

Click Here to check the current prices of the Magpul MOE Rifle Stock

The Magpul CTR Rifle Stock is a reliable and easy-to-install option for AR15/M16 carbines.

This drop-in replacement buttstock is designed to fit Mil-Spec-sized receiver extension tubes.

It features a shielded release latch that prevents snagging and accidental disengagement. The friction lock minimizes wobble, and the thick rubber butt-pad works together to provide a secure shoulder purchase, enhancing accuracy even when wearing body armor.

The sloping cheek weld has a slim profile, and the stock also has side mount slots for optional cheek risers for non-tactical applications.

It is constructed from reinforced polymer and has a streamlined A-frame design. It also has a chrome-silicon lock spring that provides positive locking and long service life.

It is compatible with Magpul ASAP and other receiver-mount sling attachments and has rear and bottom sling loops and a lanyard hole for custom para-cord rigs.

Specs:

Features:

• Mounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others.
• A-frame design with a streamlined exterior.
• Reinforced polymer construction.
• Supplemental friction lock minimizes accuracy-robbing wobble. (Performance may vary depending on the host receiver extension’s dimensional tolerances.)
• Sloping cheek weld combines a slim profile with user comfort.
• Streamlined A-frame profile and shielded release latch prevent snagging and accidental operation.
• Premium chrome-silicon lock spring provides positive locking and long service life.
• Side mounting slots accept optional cheek risers for NON-AR15/M16 applications.
• The removable 0.3-inch Rubber Butt-Pad offers an anti-slip surface and increases impact protection.
• Compatible with Magpul ASAP and other receiver-mount sling attachments.
• Sling Mounts: Rear – Push-button QD swivel sling mount accommodates up to 1.5-inch swivels (ambidextrous). Rear/Bottom – 1.25-inch sling loops.
• Toe – Lanyard hole for custom para-cord rigs.

Click Here to check the current prices of the Magpul CTR Rifle Stock

Note: items do not fit a Commercial Sized buffer tube

Specs:

Features:

• Designed for owner installation
• A covered takedown pin makes installation and removal easier and eliminates discomfort
• M4-style stock with adjustable length-of-pull
• Easy to reach rapid adjust lever
• Integrated QD swivel attachment
• Only Compatible with Mil-Spec-sized extension tubes

Click Here to check the current prices of the Adaptive Tactical EX Performance Adjustable M4-Style Stock

The Magpul MOE SL Stock is one of my go-to choices for my ARs when I want an adjustable stock. It is designed with the modern battlefield in mind and offers several features to improve maneuverability and user comfort.

The angled rubber butt-pad is optimized for use with body armor or modular gear, making it easy to transition between shoulders.

The stock is also an easy-to-install drop-in replacement for standard buttstocks, and it mounts on mil-spec-sized carbine receiver extension tubes.

The sloping cheek weld combines a slim profile with user comfort, while the dual-side release latch allows easy adjustment without becoming snagged.

The stock also features a chrome-silicon lock spring for positive locking and long service life and an internal anti-rattle feature to minimize wobble on the receiver extension tube.

The rubber butt-pad offers an anti-slip surface and increased impact protection. The rollover on the toe allows for easier shoulder transitions and a better fit when using body armor.

The stock is also compatible with Magpul ASAP, ASAP QD, and other receiver-mount sling attachments. It also includes a rear integral push-button QD swivel sling mount and a rear/bottom 1.25″ sling loop.

Specs:

Features:

• Mounts on mil-spec sized carbine receiver extension tubes not included from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others. Please see the note below
• Sloping cheek weld combines a slim profile with user comfort
• Dual-side release latch provides easy adjustment while remaining anti-snag
• Premium chrome-silicon lock spring provides positive locking and long service life
• Internal anti-rattle feature minimizes wobble on receiver extension tube
• Rubber butt-pad offers an anti-slip surface and increases impact protection
• Rollover on the toe allows for easier shoulder transitions and better fit when using body armor
• Compatible with Magpul ASAP, ASAP QD, and other receiver-mount sling attachments
• Sling Mounts
• Rear – Integral push-button QD swivel sling mount accommodates up to 1.5 in swivels ambidextrous
• Rear/Bottom – 1.25 in sling loop
• NOTE: There are two basic sizes of M4 Carbine receiver extension buffer tube: mil-spec and commercial-spec. If you have a commercial-spec size extension on your rifle, order the Commercial-Spec MOE SL.

Click Here to check the current prices of the Magpul MOE SL Stock

The B5 Systems Bravo Stock is an excellent choice for those who prioritize peak performance without unnecessary extras.

This stock is designed to be lightweight and streamlined while providing optimal functionality.

The minimalist engineering and angled butt stock ensuring quick and consistent placement, ensuring you reach the proper position every time you shoulder your gun.

The ergonomic cheek weld, color-matched steel hardware, and over-molded steel anti-rotational QD sling mounts provide added functionality, while the fixed sling mounts and no slip-cushioned butt pad offer added comfort and stability.

The Suregrip stock latch ensures a secure fit and is made of Milspec materials and finishes. This stock is compatible with all Milspec AR15 receiver extensions.

Specs:

Features:

• Ergonomic cheek weld
• Color-matched steel hardware
• Overmolded steel anti-rotational QD sling mounts
• Fixed sling mounts
• No slip-cushioned butt pad
• Suregrip stock latch
• Made of Milspec materials and finishes
• It fits all Milspec AR15 receiver extensions

Click Here to check the current prices of the B5 Systems Bravo Stock

The FAB Defense GL-Core AR15/M4 Skeleton Style Buttstock is a top-of-the-line option for those looking for a high-quality rifle buttstock compatible with both Mil-Spec and Commercial buffer tubes.

This buttstock offers a durable and compact design, featuring an integrated cheek weld and an ergonomically shaped rubberized butt-pad for easy shouldering and maneuvering the weapon.

The inverse positioning lever ensures that the buttstock will not accidentally open, and it also has two integrated quick detach rear sling swivel connectors.

Made of durable and lightweight fiberglass-reinforced polymer composite, this buttstock is sure to improve your rifle’s performance.

Specs:

Features:

• Ergonomically shaped rubberized butt-pad for quick shouldering and easy maneuvering of the weapon.
• Interchangeable buffer tube adapters for a tight fit on Mil-Spec and Commercial buffer tubes.
• Integrated cheek weld in an overall compact and sleek design.
• No protruding parts and they will not get caught on gear or webbing.
• Inversed positioning lever will not open accidentally.
• Two integrated quick detach rear sling swivel connectors.
• It is made of durable and lightweight fiberglass-reinforced polymer composite.

Click Here to check the current prices of the FAB Defense GL-Core AR15/M4 Skeleton Style Buttstock

Specs:

Features:

• Snag-free Design. No sharp edges prevent the tangling of the rifle with the shooter’s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) This tab interfaces with the shooter’s riggers’ band or bungee to secure the shooter’s sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
• Two different types of ambidextrous sling mounting options, including QD swivel sockets.
• Simple modular design. Five parts and one screw allow for the modular adaption of future stock options and configurations.

Click Here to check the current prices of the Bravo Company MFG Stock Mod 0

The B5 Systems Enhanced SOPMOD Stock is a tried and true design built for ultimate comfort and accuracy in an adjustable stock.

It is the official choice of the U.S. military and has helped thousands of soldiers maximize their field skills. This stock improves accuracy and precision from active engagements to shooting at the range while ensuring a perfect fit.

With this stock, you can focus on what’s important – taking your performance to the next level. The installation process is simple and easy, pull the adjustment lever down, slide the stock onto the receiver extension and release the lever to engage it fully.

The battery tube can be easily removed by twisting the cap and pulling it out.

The stock features an ergonomic cheek weld and color-matched steel hardware, over-molded steel anti-rotational QD sling mounts, fixed sling mounts, no slip-cushioned butt pad, sure-grip stock latch, dual storage compartments, made of Milspec materials and finishes, fits all Milspec AR15 receiver extensions.

Specs:

Features:

• Ergonomic cheek weld
• Color-matched steel hardware
• Overmolded steel anti-rotational QD sling mounts
• Fixed sling mounts
• No slip-cushioned butt pad
• Suregrip stock latch
• Dual storage compartments
• Made of Milspec materials and finishes
• It fits all Milspec AR15 receiver extensions

Click Here to check the current prices of the B5 Systems Enhanced SOPMOD Stock

The Magpul STR Stock is a perfect replacement stock for your AR-15/M4 carbines that use mil-spec receiver extension tubes.

These feature two water-resistant battery storage tubes located on either side of the stock and are accessible in any stock position via a removable rubber plug.

This Magpul STR AR15/M4 Stock has a shielded operation lever and a supplemental friction locking system that prevents accidental operation and minimizes excessive movement, providing enhanced weapon stability and accuracy.

It also has two integral sling loops and a reversible push-button QD sling mount, making it a must-have for any rifle owner. It is compatible with mil-spec sized carbine receiver extension tube.

The AR stock also has two water-resistant battery storage tubes located on the left and right sides of the stock, each tube can store up to two 2 CR123A lithium or AA batteries.

The tubes are accessible from the rear in any stock position via a hand-removable rubber plug.

The supplemental friction lock minimizes accuracy robbing wobble, and the chrome-silicon lock spring provides positive locking and long service life.

The sloping cheek weld provides a wide contact surface for user comfort, shielded release latch prevents snagging and accidental operation, replaceable 0.30 in Rubber Butt-Pad offers an anti-slip surface and increases impact protection, compatible with Magpul ASAP, ASAP QD, and other receiver-mount sling attachments.

The stock also has rear and bottom sling mounts, rear – reversible type 1 sling mount fits up to 1.5 inches push-button QD swivels (swivel not included), rear/bottom – 1.25 inches sling loops.

Specs:

Features:

• Mounts on mil-spec sized carbine receiver extension tubes not included from manufacturers such as Colt, Armalite, S&W, LMT, and others, please see the note below
• Two water-resistant battery storage tubes are located on the left and right sides of the stock
• Each tube will store up to two 2 CR123A lithium or AA batteries
• Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
• Supplemental friction lock minimizes accuracy robbing wobble*
• Premium chrome-silicon lock spring provides positive locking and long service life
• Sloping cheek weld provides a wide contact surface for user comfort
• Shielded release latch prevents snagging and accidental operation
• The replaceable 0.30 in Rubber Butt-Pad offers an anti-slip surface and increases impact protection
• Compatible with Magpul ASAP, ASAP QD, and other receiver-mount sling attachments
• Sling Mounts
• Rear – Reversible Type 1 Sling Mount fits up to 1.5 in push-button QD swivels swivel not included
• Rear/Bottom – 1.25 in sling loops
• NOTE: There are two basic sizes of M4 Carbine receiver extension buffer tubes: mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial-Spec STR.

Click Here to check the current prices of the Magpul STR Stock

The Magpul SL-S Stock is an upgraded version of the Magpul MOE SL carbine stock, designed as a direct replacement for AR15/M4 carbines.

This stock stands out for its sleek profile, dual-side release latches, and waterproof battery tubes, making it the slimmest storage tube stock on the market.

The SL-S offers a comfortable cheek weld, a 10m waterproof storage area, and a compact design that allows for an upright head position and minimal bulk.

Thanks to its rolled toe and angled rubber butt-pad, it is optimized for use with body armor and features an ambidextrous QD sling swivel socket.

The unique leaf-spring tension system provides a secure fit on mil-spec receiver extensions while offering less friction than the original SL.

The MOE SL-S is the most convenient, comfortable, and efficient storage stock.

Specs:

Features:

• Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others.
• Two water-resistant battery storage tubes are located on the left and right sides of the stock. Each tube will store up to two (2) CR123A lithium or AA batteries. Tubes are accessible from the rear in any stock position via hand-removable, o-ringed rubber plugs that are waterproof to 10 meters.
• Sloping cheek weld combines a slim profile with user comfort.
• Dual-side release latch provides easy adjustment while remaining anti-snag.
• Premium chrome-silicon lock spring provides positive locking and long service life.
• Internal anti-rattle leaf spring minimizes wobble on the receiver extension tube.
• Rubber butt-pad offers an anti-slip surface and increases impact protection.
• Rollover on the toe allows for easier shoulder transitions and better fit when using body armor.
• Compatible with Magpul ASAP, ASAP QD, and other receiver-mount sling attachments.
• Sling Mounts: Rear – Integral push-button QD swivel sling mount accommodates up to 1.5″ swivels (ambidextrous). Rear/Bottom – 1.25″ sling loops.

Click Here to check the current prices of the Magpul SL-S Stock

Its easy installation, drop-in design, and lightweight construction make it an excellent choice for improving the maneuverability of your AR.

The adjustable stock also boasts added features such as a storage space in the tail and a sloping cheek weld for comfort during use.

The rubber butt pad provides additional impact protection.

The sleek design and superior build quality make the Magpul Industries ACS-L Rifle Stock a top choice for any build, and it’s my go-to for its comfort and convenience.

Specs:

Features:

• Mounts on mil-spec sized carbine receiver extension tubes not included from manufacturers such as Colt, Armalite, S&W, LMT, and others, please see the note below
• Sloping cheek weld provides a wide contact surface for user comfort
• Storage compartment in tail of stock with positive latching access door on right-hand side
• Supplemental friction lock minimizes accuracy robbing wobble*
• Shielded release latch prevents snagging and accidental operation
• Premium chrome-silicon lock spring provides positive locking and long service life
• The replaceable 0.30″ Rubber Butt-Pad offers an anti-slip surface and increases impact protection
• Compatible with Magpul ASAP, ASAP QD, and other receiver-mount sling attachments
• Sling Mounts
• Mid – Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5 in push-button swivels swivel not included
• Rear/Bottom – 1.00 in sling loop
• NOTE: There are two basic sizes of M4 Carbine receiver extension buffer tube: mil-spec and commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order the Commercial-Spec ACS-L.

Click Here to check the current prices of the Magpul ACS-L Rifle Stock

The Magpul PRS Gen 3 is a precision rifle stock designed for the AR15/M16 and AR10/SR25 platforms.

It features easy, toolless adjustments for both length of pull and cheek piece height, making it an excellent option for semi-automatic sniper or varmint rifles.

The stock is optimized for rifle-length receiver extensions but will also fit many mil-spec carbine and A5-length tubes.

It also includes a cant and height-adjustable rubber butt-pad, rotation-limiting QD sling swivel cups, and M-LOK® slots for rear monopod mounting.

This stock is made in the USA and offers a solid and stable interface and can withstand severe impact and recoil.

The adjustment knobs are made of machined aluminum and steel and finished with Melonite for wear and corrosion resistance. This is one of the best AR 15 stocks with the best cheek weld.

Additionally, the stock offers a reversible 1.25″ aluminum sling loop and M-LOK slots for added sling mounting possibilities or for attaching 1913 Picatinny rails for use with a monopod.

Specs:

Features:

• Mounts to rifle-length receiver extension tube without A2 spacer but will also accommodate mil-spec sized M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates not included*
• Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG
• Rubber butt-pad provides positive shoulder purchase to prevent slippage and is adjustable for both cant and height
• Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents
• Steel adjustment shafts finished with Melonite for wear and corrosion resistance
• All aluminum components finished with MIL-A-8625F, Type III, Class 2 hard anodizing
• Bottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails for use with a monopod
• Sling Mounts
• Front/Rear – rotation-limited QD sling swivel mounts swivel not included
• Rear – 1.25 in aluminum sling loop left-right reversible

Click Here to check the current prices of the Magpul PRS Gen 3

The Magpul UBR Gen 2 is an advanced adjustable stock designed for use with AR15/M4 and AR10/SR25 platforms.

It boasts several features designed to provide the same level of strength and stability as a fixed stock while offering a consistent and comfortable cheek weld in any position.

Some of the key features of the UBR Gen 2 include its fixed cheek piece, which ensures a consistent cheek weld in all of its eight positions, as well as its compatibility with Carbine and A5 buffer systems.

Additionally, it is made from durable materials that can withstand severe impacts and is nearly five ounces lighter than its predecessor.

The UBR Gen 2 includes additional features, such as front and rear QD sling attachment points, two footman’s loops, an ergonomic MOE SL angled-toe rubber butt-pad, and a customizable storage compartment.

It is made in the USA and is known for its solid “fixed stock” lockup and consistent cheek weld in all positions. The adjustment lever requires only gross motor movement to operate, yet the entire stock remains streamlined and anti-snag.

Mounts on a durable custom Receiver Extension tube (included) to accommodate carbine buffers, springs, and aftermarket A5 buffer systems.

The storage compartment in the tail of the stock is removable, and the door is reversible for user preference. The rubber butt-pad offers an anti-slip surface and increases impact protection.

Rollover on the toe allows for easier shoulder transitions and better fit when using body armor. This is a very durable stock and offers a good cheek weld.

Specs:

Features:

• Mounts on a durable custom Receiver Extension tube (included) to accommodate the standard M4 carbine buffer and spring and aftermarket A5 buffer systems.
• Solidly fixed stock lockup and consistent cheek weld in all positions.
• 8-Position LOP adjustability.
• The adjustment lever requires only gross motor movement to operate, yet the entire stock remains streamlined and anti-snag.
• Enhanced lock mechanism with dual locking pawls for maximum drop strength and shock resistance.
• Multi-shell construction provides a solid foundation and shields critical operating parts from penetration damage.
• Sloping cheek weld combines a slim profile with user comfort.
• The Storage Compartment in the tail of the stock is removable, and the door is reversible for user preference.
• Rubber butt-pad offers an anti-slip surface and increases impact protection.
• Rollover on the toe allows for easier shoulder transitions and better fit when using body armor.
• Sling Mounts: Front – QD swivel mount for ambidextrous one-point QD sling mounting; Left/Right Rear – Rotation-limited QD swivel sling mounts fit up to 1.5-inch push-button swivels; Bottom – 1.25-inch sling loop (additional loop accessible when Storage Compartment is removed).
• Update of the revolutionary Utility/Battle Rifle (UBR) stock

Click Here to check the prices of the Magpul UBR Gen 2

The Law Tactical Folding Stock Adapter is a unique and innovative product that allows for folding stocks on AR platform rifles.

It is compatible with various systems, including direct impingement and gas pistons, and can be used with different types of buffer tube and stocks.

The adapter is designed for easy and low-profile transport of rifles in non-permissive environments.

It has a simple one-button release mechanism that allows the stock to be folded and locked into place with minimal effort.

The adapter is constructed from high-quality CNC machined 4140 steel and is built and assembled in the USA. It does not affect the function of the rifle when unfolded and in the standard fire position.

These can be used in conjunction with adjustable stocks and collapsible stocks.

Additionally, it features an integrated single-point sling attachment point. These will also work on a pistol buffer tube.

Specs:

Features:

• Adds 1.3 inches to length of pull
• Low hinge reduces interference when charging weapon
• The retaining Pin uses a standard, mil-spec buffer retaining pin
• Low-profile housing, locking lug, and latch
• Set Screw prevents the adapter from loosening from the receiver
• Quick detach sling attachment point
• Toolless bolt carrier extension – Install and remove without tools for easy maintenance
• Replaceable o-rings prevent additional damage to the adapter in the folded position
• The symmetrical design eliminates interference with buffer retaining pin

Click Here to check the current prices of the Law Tactical Folding Stock Adapter